Truck & Bus Forum Truck & Bus Forum
19:28
Welcome to the Truck & Bus Forums
Welcome!A very warm welcome to truckandbusforum.com, a completely FREE online community for people worldwide with an interest in vintage and modern trucks and buses.

Click here to go to the forums home page and find out more.
Please feel free to join by clicking HERE.

Go Back   Truck & Bus Forum > Truck Forums > Vintage Truck Discussion

Reply
 
Thread Tools
  #1  
Old 22nd June 2013, 02:05
mtbiggs mtbiggs is offline  
Member
 
Join Date: Jun 2013
Location: new zealand
Posts: 3
Bedford TK rear park brake setup.

Hi all,

I have a TK Bedford, model I believe is KC, 16inch wheel model and year around mid 1970. It has an air actuated park brake, the pressure pot is mounted on the diff. The pressure pot has an internal piston / spring and a rod to then actuate through levers to long 2 rods. One of these long rods goes to the LH rear brake bisector, and the other to the RH brake bisector. Both these rods and the pressure pot rod have adhjusting threads on them.

Can someone please tell me how to set up this park brake system, all I know is that it has to be done with the air on, so the spring is compressed in the pot.The spring is what puts the brakes on when there is no air pressure.

Thanks for your help

Christine

P.S(I am a mechanic all you guys, so can do this if I know the procedure / settings)
Reply With Quote
  #2  
Old 22nd June 2013, 10:48
coachman coachman is offline  
Senior Member
 
Join Date: Jun 2011
Location: Worthing
Posts: 146
Images: 1526
Quote:
Originally Posted by mtbiggs View Post
Hi all,

I have a TK Bedford, model I believe is KC, 16inch wheel model and year around mid 1970. It has an air actuated park brake, the pressure pot is mounted on the diff. The pressure pot has an internal piston / spring and a rod to then actuate through levers to long 2 rods. One of these long rods goes to the LH rear brake bisector, and the other to the RH brake bisector. Both these rods and the pressure pot rod have adhjusting threads on them.

Can someone please tell me how to set up this park brake system, all I know is that it has to be done with the air on, so the spring is compressed in the pot.The spring is what puts the brakes on when there is no air pressure.

Thanks for your help

Christine

P.S(I am a mechanic all you guys, so can do this if I know the procedure / settings)
I'm not sure of this set up Christine, but I would advise you to beware of having hands and fingers on the short rod that comes out of the actuator when it is applied. If it was I think it is, then it applies the brakes by pulling the linkage and not pushing it. This means that the spring is in the front of the actuator pushing the piston back and not behind the piston pushing it forward. Unfortunately if it is this set up unlike most spring brakes there is no way that the brake can be wound off by mechanical means and the way I was warned about was '' get your hands away from that or you will end up wearing it like a glove '' .
Reply With Quote
  #3  
Old 22nd June 2013, 12:35
G-CPTN G-CPTN is offline  
Senior Member
 
Join Date: Sep 2008
Location: Tynedale
Age: 79
Posts: 3,698
Images: 209
I would imagine (using logic, not experience) that you first adjust the wheelbrakes so that they are as close to the drums as possible and don't rub, then, with the air system charged adjust the parking brake linkages until there is no slack but they are not causing the brakes to drag.
Reply With Quote
  #4  
Old 23rd June 2013, 15:28
dandabambury dandabambury is offline  
Member
 
Join Date: Jun 2013
Location: Gwynedd
Posts: 5
Hi.
I have no vintage truck, or particular knowledge of them, but I do have a set of five Bedford Truck and Coach Service Training Manuals, which a relative has asked me to sell on eBay. I have not listed them yet. In the front of the "Brakes" manual, it says "This manual provides the experienced serviceman with information on the special features of the brakes used on 1973 Bedford trucks & coaches, except Series M4 x 4 trucks,....."
Sections 153 and 153a deal with parking brake linkage and adjustment; is that what you are looking for?
Unfortunately, I am also not a computer whizz, so I cannot find out how to attach a photo. If you would like me to send it to an e-address, I will willingly do so.
Reply With Quote
  #5  
Old 23rd June 2013, 17:19
G-CPTN G-CPTN is offline  
Senior Member
 
Join Date: Sep 2008
Location: Tynedale
Age: 79
Posts: 3,698
Images: 209
Quote:
Originally Posted by dandabambury View Post
Unfortunately, I am also not a computer whizz, so I cannot find out how to attach a photo.
The easiest method (unless you have a scanner) is to take a digital photograph then upload it to a site such as Photobucket.com then copy the URL (that begins IMG) and paste it into your text message here.

Alternatively, just copy (word for word) the text (typing it into here). It's slow but words is words and easily read wherever.

Last edited by G-CPTN; 23rd June 2013 at 17:25.
Reply With Quote
  #6  
Old 30th June 2013, 20:35
dandabambury dandabambury is offline  
Member
 
Join Date: Jun 2013
Location: Gwynedd
Posts: 5
1973 bedford - parking brake setup

I hope that the two photo's of the pages from my manual transmit OK, and that they are of help.


PICT1182.jpg

PICT1183.jpg
Reply With Quote
  #7  
Old 30th June 2013, 20:41
dandabambury dandabambury is offline  
Member
 
Join Date: Jun 2013
Location: Gwynedd
Posts: 5
Parking brake setup - 1973 Bedford.

Omitted to send a further 3 photo's. Here they are.PICT1179.jpg

PICT1180.jpg

PICT1181.jpg

I am sure that you can sort out the order they should be in!
Reply With Quote
  #8  
Old 6th April 2020, 09:26
jacksmuthes jacksmuthes is offline
Member
 
Join Date: Apr 2020
Location: Au
Posts: 1
When trucking i recommend having a contact with a mobile truck mechanics Carindale that is very helpful specially in problems on the road.
__________________
We provide Mobile Truck Repair Services and more. Visit our Home Page/Website for more information.

URL: mobile truck mechanics Carindale
Reply With Quote
  #9  
Old 27th July 2020, 23:01
Opalminer72 Opalminer72 is offline  
Member
 
Join Date: Jul 2020
Location: Australia
Posts: 2
Can I ask a question. I have 74 TK cab Bedford
Currently have no air so does this mean my park brake is on or off
I thought no air meant brakes are off
Reply With Quote
  #10  
Old 29th July 2020, 09:02
RustRemoverJim's Avatar
RustRemoverJim RustRemoverJim is offline  
Member
 
Join Date: Jul 2020
Location: Nantwich
Age: 55
Posts: 13
Images: 4
My logic tells me; If you were to park on a hill, the parking brake should stay on, even when the air pressure leaks away to nothing! There is no mechanical lock on the parking brake. A spring apples the parking brake and the air overcomes the spring when the parking brake is released. My 76 TK has the same parking brake set up and the rods push from the central mechanism and into the cylinder on the drums when the air pressure is applied.
My old manual does not cover this modern system so I would love to know how this works, as I’m trying to remove the drums but it’s all rust and no give.
Attached Images
File Type: jpg 0097A8B3-AE01-41AC-B237-0BB4332D8469.jpg (11.2 KB, 5 views)

Last edited by RustRemoverJim; 31st July 2020 at 11:19. Reason: Photo added
Reply With Quote
Reply

Bookmarks



Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is Off
HTML code is Off

Forum Jump


All times are GMT +1. The time now is 19:28.


Powered by vBulletin® Version 3.8.2
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.