Two Volvo L90's moving a railway switch (Video)

[Bobjork]

http://www.youtube.com/watch?v=tjmsueaGHcs
Two Volvo L90s today at the railway training centre.

First removing old sleepers from the trackbed.
Then moving the point/switch into place so we can mount it.
Last in the movie, a Bobcat running on rails.

Wanted to upload this to the TV section but couldn't find any category for it.

[coastie]

It's a good job they're 4wd!! A tad more ballast on the r send I feel!

Thankyou for posting it though.

[Bobjork]

Originally Posted by coastie

It's a good job they're 4wd!! A tad more ballast on the r send I feel!

Thankyou for posting it though.

Where do you want more ballast?

We are going to put some ballast in the switch when it is mounted. The grass is in ballast (and coal).
The switch will not be used by trains, it is only for display and for practicing measuring etc.

[G-CPTN]

I cannot imagine our H&S allowing that!

Machines with greater lifting capacity would be required . . .

Thanks for sharing.

After spending time earlier today researching Scania L-types I was expecting to see vintage bonneted trucks!

[Bobjork]

Originally Posted by G-CPTN

I cannot imagine our H&S allowing that!

Machines with greater lifting capacity would be required . . .

Thanks for sharing.

After spending time earlier today researching Scania L-types I was expecting to see vintage bonneted trucks!

Yes, greater loading capacity would be nice. But they would also be bigger and it was tight on some places. (One of the loaders dented the wall of one of the sheds).

No old trucks here We also got a visit from a Scania with two loads of ballast. But I was busy doing other works so no pic of that one.

[G-CPTN]

Ballast can be either Track Ballast:- http://en.wikipedia.org/wiki/Track_ballast

or Ballast Weights added to counterbalance or increase weight up to a prescribed minimum.

[Bobjork]

Originally Posted by G-CPTN

Ballast can be either Track Ballast:- http://en.wikipedia.org/wiki/Track_ballast

or Ballast Weights added to counterbalance or increase weight up to a prescribed minimum.

Aha. I knew that ballast could be that as well... but I did not think of it in this case
But "r send"?

[G-CPTN]

r send = ar_se end (back end) / rear.

[Bobjork]

Aha, like arsenal
Too advanced for me right now. Tired after a day of digging.

[G-CPTN]

the British/Irish-English vulgarism for the buttocks, equivalent to "ass" in American or Canadian English

"********," a similar British/Irish term for the anus, equivalent to "*******" in American or Canadian English

From:- http://en.wikipedia.org/wiki/****

(except that you have to replace the **** with the letters a_r_s_e - if you try to put that word here it 'bleeps' it out with astericks!)

I see that we aren't allowed a_rsehole or even a_sshole . . .

It is used in all but the most polite society to mean backside as in "Look at the a_rse on that lass/girl/woman."
or even "Get your a_rse down here!" meaning "Come here quickly!"