Truck & Bus Forum - Bedford MK rear brakes

Truck & Bus Forum (https://www.truckandbusforum.com/index.php)

- Vintage Truck Discussion (https://www.truckandbusforum.com/forumdisplay.php?f=7)

- - Bedford MK rear brakes (https://www.truckandbusforum.com/showthread.php?t=4869)

gavinbeddy

9th July 2015 06:36

Bedford MK rear brakes

I need to service the rear brakes on a Bedford MK 4X4. Could someone please explain how to remove the rear brake drum. It looks like that I will have to start with removing the half shaft. Is that correct?

G-CPTN

9th July 2015 12:50

Quote:

Originally Posted by gavinbeddy (Post 15690)

Yes, remove the half shaft then remove the hub.

gavinbeddy

14th July 2015 16:41

Bedford rear brakes

Thanks for your helpful and quick response.
I have removed the rear brake drum and the brake cylinder with is seized. How is the cylinder stripped? I have removed a retainer ring from the side that the park brake rod enters the cylinder. What follows after that?

G-CPTN

14th July 2015 16:53

My MK manual (not for your design of parking brake) states "remove the cylinder securing bolts and withdraw the cylinder".
"Remove the adjusters, spring clips and rubber boots and withdraw the pistons."

gavinbeddy

17th July 2015 18:06

Bedford MK 4x4 Rear brake cylinder

Thanks, I have done that. I now need to take the the brake cylinder apart.

All times are GMT +1. The time now is 11:24.