Quote:
Originally Posted by MazTalks
I can't find the indicator rod that you mentioned on the air servo,
|
The indicator rod is about the diameter of a wire coat-hanger wire (from memory) and should stick-out along the axis of the air servo.
See item 23 on this illustration:-
http://i24.photobucket.com/albums/c1...n/IMGP8509.jpg
Quote:
Originally Posted by MazTalks
My brake fluid levels are fine and the air pressure is around 7 on the dial.
But when I brake the pedal travels with no resistance to the floor and then I have minimal braking once my foot is on the floor.....
|
Assuming that your hydraulics have been correctly bled of all air (writing the hydraulic circuit), then it is possible that there is too much travel on the brake mechanism and the wheelbrakes need adjusting.
Follow the procedure listed above.