[Roadrunner5446]

Hi, nice forum, good work, this is my first post on here, hoping to find a few solutions to my ever increasing list of problems. Firstly, will the barrel ignition from a c reg 8:10 roadrunner fit my f reg 8:12 does anybody know? As in the whole unit so as to refit to the column and reconnect all the wiring...

Secondly, been having problems with the clutch fluid leaking from the bell housing . Fitted new slave cylinder 3 months ago, all was fine. Just done 1000 miles to south of france and now theres leaking from the bell housing and ive to top up the reservoir literally every 4-5 minutes while im driving. There is no fluid around the actual cylinder if this helps. Am i right in thinking that its summat and nowt with the leak being so quick and that maybe i can tighten something up and re bleed or is the cylinder gone again already?
And last but not least (for the now touch wood) a klunking sound has started on the offside wheel area when im coming off roundabouts or turning extremly(dropping the right hand down) (as im in france im going around the roundabout the opposite way if that makes sense)
Thanks so much for taking the time to read this, any help or suggestions are greatly appreciated. Im in the verge of driving the truck into a canal and forgetting about it but after all weve been through together deep down i know this would be a crying shame . Thanks again.