[zulu]

For a short while I drove Atlanteans in the mid 90's and they frequently broke down. Not surprising as they were mostly 20 years old by then. But there was one thing that often kept cropping up. The bus would suddenly cut out, and when the fitter turned up he would often identify it as a loose solenoid wire. Apparently, the road muck thrown up by the back wheels caused the solenoid wire to corrode, and if you squatted down and looked underneath, you could see the wire dangling loose. Was this always a problem with atlanteans, or was this due to lack of proper maintenance/steam cleaning after dereg?

Another thing that has always intrigued me, is how an Atlantean could be "back started." If the engine failed and could not be restarted from the cab, I think it was possible to take the dipstick and start the engine by pressing it against something. Would that be the coil, or solenoid or what? I saw this done once but can't remember how it was done exactly.